Cisco Wireless Controller: Verifying IOS Version In CLI

If you need to know, in the Cisco wireless controller, what the version of IOS is, I usually go into CLI to verify.  Yes, you can do it in the GUI.  I just prefer CLI.  Here is the command.

(Cisco Controller)
User: login
Password:********
(Cisco Controller) >show sysinfo

Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.3.112.0
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Build Type....................................... DATA + WPS

System Name...................................... Wireless_Controller
System Location.................................. BHAM
System Contact................................... XXX XXX
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
Redundancy Mode.................................. Disabled
IP Address....................................... 10.42.4.6
Last Reset....................................... Power on reset
System Up Time................................... 59 days 14 hrs 13 mins 23 secs
System Timezone Location......................... (GMT -6:00) Central Time (US and Canada)

Configured Country............................... US  - United States
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C

--More-- or (q)uit
Internal Temperature............................. +45 C
External Temperature............................. +24 C
Fan Status....................................... OK

State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 2
Number of Active Clients......................... 344

Burned-in MAC Address............................ F0:F7:55:XX:XX:XX
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 100

(Cisco Controller) >

========================================