Cisco Switch: "Show Inventory" Command

Sometimes you just need to know about your equipment.  Like taking an inventory.  Below is a stack of Cisco 2960s.  They have the stacking module, gbic, etc.  "Show inventory" shows you serial and some other good info you might need.

2960#sh inventory
NAME: "2", DESCR: "WS-C2960XR-48FPS-I"
PID: WS-C2960XR-48FPS-I, VID: V02  , SN: FDO1916XXXX

NAME: "Switch 2 - Power Supply 1", DESCR: "FRU Power Supply"
PID: PWR-C2-1025WAC    , VID: V01L , SN: LIT1913XXXX

NAME: "Switch 2 - FlexStackPlus Module", DESCR: "Stacking Module"
PID: C2960X-STACK      , VID: V01  , SN: FOC1923XXXX

NAME: "GigabitEthernet2/0/49", DESCR: "1000BaseSX SFP"
PID: GLC-SX-MMD          , VID: V01  , SN: GTFJXXXX

NAME: "1", DESCR: "WS-C2960XR-24PS-I"
PID: WS-C2960XR-24PS-I , VID: V02  , SN: FDO1915XXXX

NAME: "Switch 1 - Power Supply 1", DESCR: "FRU Power Supply"
PID: PWR-C2-640WAC     , VID: V01L , SN: LIT1910XXXX

NAME: "Switch 1 - FlexStackPlus Module", DESCR: "Stacking Module"
PID: C2960X-STACK      , VID: V01  , SN: FOC1922XXXX

NAME: "GigabitEthernet1/0/25", DESCR: "1000BaseSX SFP"
PID: GLC-SX-MMD          , VID: V01  , SN: GTFJXXXX