Brocade Switch: ICX6610 POE Upgrade

I know I have posted on this at some point, but I wanted to cover it again.  Here is how you upgrade the POE firmware on an ICX switch.  10.10.10.1 is my tftp server where my firmware is located.

ICX6610-24P Switch#inlin power install-firmware stack 1 tftp 10.10.10.1 fcx_poeplus_02.1.0.b004.fw
ICX6610-24P Switch#Flash Memory Write (8192 bytes per dot)
....................
 tftp download successful stackId = 1 file name = poe-fw
Sending PoE Firmware to Stack Unit 1.
PoE Warning: Upgrading firmware in slot 1....DO NOT SWITCH OVER OR POWER DOWN THE UNIT.
PoE Info: FW Download on slot 1...sending download command...
PoE Info: FW Download on slot 1...TPE response received.
PoE Info: FW Download on slot 1...sending erase command...
PoE Info: FW Download on slot 1...erase command...accepted.
PoE Info: FW Download on slot 1...erasing firmware memory...
PoE Info: FW Download on slot 1...erasing firmware memory...completed
PoE Info: FW Download on slot 1...sending program command...
PoE Info: FW Download on slot 1...sending program command...accepted.
PoE Info: FW Download on slot 1...programming firmware...takes around 6 minutes....
U1-MSG: PoE Info: Firmware Download on slot 1.....10 percent completed.
U1-MSG: PoE Info: Firmware Download on slot 1.....20 percent completed.
U1-MSG: PoE Info: Firmware Download on slot 1.....30 percent completed.
U1-MSG: PoE Info: Firmware Download on slot 1.....40 percent completed.
U1-MSG: PoE Info: Firmware Download on slot 1.....50 percent completed.
U1-MSG: PoE Info: Firmware Download on slot 1.....60 percent completed.
U1-MSG: PoE Info: Firmware Download on slot 1.....70 percent completed.
U1-MSG: PoE Info: Firmware Download on slot 1.....80 percent completed.
U1-MSG: PoE Info: Firmware Download on slot 1.....90 percent completed.
U1-MSG: PoE Info: Firmware Download on slot 1.....100 percent completed.
PoE Info: FW Download on slot 1...programming firmware...completed.
PoE Info: FW Download on slot 1...upgrading firmware...completed. Module will be reset.
PoE Info: Resetting in slot 1....
PoE Info: Resetting module in slot 1....completed.
PoE Info: Programming Brocade defaults.....
PoE Info: Programming Brocade defaults. Step 1: Writing port defaults on module in slot 1....
PoE Info: Programming Brocade Defaults: Step 2: Writing PM defaults on module in slot 1.
PoE Info: Programming Brocade defaults. Step 3: Writing user byte 0xf0 on module in slot 1.
PoE Info: Programming Brocade defaults. Step 4: Saving settings on module in slot 1.
PoE Info: Programming Brocade defaults....completed.