Palo Alto: How To Determine What Ports Are 10 Gig Ports On Palo Alto PA-850 Series

What ports are 10Gig on the Palos?  Good question.  You cant tell by just looking at them, so you either know what they are or you do what I do.  Go into CLI and run the following command:

PA850-1(active)> show system state | match capability

cfg.capability.dfa.sw: 0x0
cfg.capability.regex.sw: 0x0
peer.cfg.capability.dfa.sw: 0x0
peer.cfg.capability.regex.sw: 0x0
sys.s1.ha1.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p1.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p10.capability: [ auto, 10Gb/s-full, ]
sys.s1.p11.capability: [ auto, 10Gb/s-full, ]
sys.s1.p12.capability: [ auto, 10Gb/s-full, ]
sys.s1.p2.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p3.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p4.capability: [ auto, 10Mb/s-half, 10Mb/s-full, 100Mb/s-half, 100Mb/s-full, 1Gb/s-half, 1Gb/s-full, ]
sys.s1.p5.capability: [ auto, 1Gb/s-full, ]
sys.s1.p6.capability: [ auto, 1Gb/s-full, ]
sys.s1.p7.capability: [ auto, 1Gb/s-full, ]
sys.s1.p8.capability: [ auto, 1Gb/s-full, ]
sys.s1.p9.capability: [ auto, 10Gb/s-full, ]

It looks like ports 9 - 12 are my 10Gig ports on the PA-850.